工学博士，副教授，硕士生导师。2016年6月博士毕业于西安交通大学，2016年8月进入合肥工业大学机械工程学院工作；主持国家自然科学基金青年项目、安徽省自然科学基金青年项目、中国博士后科学基金面上资助、学术新人提升A计划与B计划以及航天六院合作项目等项目，参与国家自然科学基金重点项目、国防预研基金重点项目以及与中国航天推进技术研究院、中国工程热物理研究院、西安陕鼓动力股份有限公司等合作项目；研究成果在Journal of Sound and Vibration、Mechanical Systems and Signal Processing、Nonlinear Dynamics等国际知名学术期刊上发表论文20余篇，申请发明专利10余项；担任Journal of Sound and Vibration、Mechanical Systems and Signal Processing、Nonlinear Dynamics、Journal of Acoustic and Vibration-Transactions of the ASME、中国科学等期刊审稿人。

主要研究方向

1、复杂结构动力学建模、分析与控制

2、机械系统健康监测与故障诊断

3、复杂机电系统数字孪生技术

4、智能材料与结构

5、结构裂纹损伤建模与识别

开设课程

《机械系统动力学基础》、《数据采集与控制》、《机械振动与模态分析》

近年的科研项目、专著与论文、专利、获奖

一、科研项目

[1]国家自然科学基金项目青年科学基金，强离心力影响下的叶轮裂纹故障定量建模方法与动力学机理研究，2019/01-2021/12，已结题，主持；

[2]中国博士后科学基金面上资助，高速运行状态下叶轮裂纹故障的非线性动力学机理研究，2018/06-2020/05，已结题，主持；

[3]安徽省自然科学基金青年项目，含裂纹叶轮转子系统的高保真建模方法与动力学特性研究，2018/07-2020/06，已结题，主持；

[4]学术新人提升计划A项目，强离心力影响下的叶轮裂纹故障定量建模方法与动力学机理研究，2018/05-2019/12，已结题，主持；

[5]学术新人提升计划B项目，整体叶盘微滑移摩擦阻尼环减振机理研究，2020/05-2022/12，在研，主持；

[6]中国航天推进技术研究院合作项目，***典型故障机理研究，2021/06-2023/06，在研，主持。

二、部分学术论文

[1]Shuai Wang, Geng Yang, Li Ji, Chuanxing Bi, Changjun Zheng. Multi-mode vibration attenuation of mistuned bladed disks by frictional tuned mass dampers array. Journal of Sound and Vibration, 536:117176, 2022.

[2] Shuai Wang, Menghui Liang. Crack identification in cyclic symmetric structures based on relative indicators of frequency separation. Mechanical Sciences, 12:173-184, 2021.

[3] Shuai Wang, Chuan-Xing Bi, Chang-Jun Zheng. A Reduced-Order Model for the Vibration Analysis of Mistuned Blade–Disc–Shaft Assembly. Applied Sciences, 2019.

[4] Shuai Wang, Chuanxing Bi, Bin Zi, Changjun Zheng. Vibration Characteristics of Rotating Mistuned Bladed Disks considering the Coriolis Force, Spin Softening, and Stress Stiffening Effects. Shock and Vibration, 9714529, 2019.

[5] Shuai Wang, Chuanxing Bi, Jiazhu Li, Changjun Zheng. Parametric instability of anisotropic rotor-bearing systems with a transverse crack. Journal of Sound and Vibration. 2019, 443:253-269.

[6] Shuai Wang, Yanyang Zi, Sen Qian, Bin Zi, Chuanxing Bi. Effects of unbalance on the nonlinear dynamics of rotors with transverse cracks. Nonlinear Dynamics. 2018, 91: 2755- 2772.

[7] Wangpeng He, Yanyang Zi, Binqiang Chen, Shuai Wang, ZhengJia He. Tunable Q-factor wavelet transform denoising with neighboring coefficients and its application to rotating machinery fault diagnosis. SCIENCE CHINA Technological Sciences, 56:1956–1965, 2013.

[8] Shuai Wang, Yanyang Zi, Yu Wang, ZhengJia He. A 3D nonlinear finite element method for the dynamic analysis of rotating rotor with a transverse crack. SCIENCE CHINA Technological Sciences, 60(2):219-231, 2017.

[9] Shuai Wang, Yanyang Zi, Zhiguo Wan, Bing Li, Zhengjia He. Effects of multiple cracks on the forced response of centrifugal impellers, Mechanical Systems and Signal Processing, 60: 326-343, 2015.

[10] Shuai Wang, Yu Wang, Yanyang Zi, Zhengjia He. A 3D finite element-based model order reduction method for parametric resonance and whirling analysis of anisotropic rotor-bearing systems, Journal of Sound and Vibration, 359: 116-135, 2015.

[11] Shuai Wang, Yu Wang, Yanyang Zi, Bing Li, Zhengjia He. Reduced-order modeling for rotating rotor-bearing systems with cracked impellers using three-dimensional finite element models, Journal of Sound and Vibration, 355: 305-321, 2015.

[12] Shuai Wang, Yanyang Zi, Bing Li, Chunlin Zhang, Zhengjia He. Reduced-order modeling for mistuned centrifugal impellers with crack damages. Journal of Sound and Vibration. 333:6979-6995, 2014.

[13] Shuai Wang, Yanyang Zi, Mingquan Zhang, et al. Statistical analysis of the vibration of mistuned centrifugal impellers with crack damage, MFPT 2014 Conference,美国,弗吉尼亚, 2014.

[14] Cheng Wan, Chang-Jun Zheng, Shuai Wang, Chuan-Xing Bi. Acoustic resonance analysis of open cavities with the boundary element method. 48th International Congress and Exhibition on Noise Control,西班牙,马德里, 2019.

[15] Shuai Wang, Menghui Liang, Chuanxing Bi, Crack Identification in Cyclic Symmetric Structures Based on Relative Frequency Indicators. Proceedings of the 14th International Conference on Frontiers of Design and Manufacturing, Xi'an, 2020.

[16] Menghui Liang, Shuai Wang, Changjun Zheng, Chuanxing Bi. A coupled beam and solid finite element model for the dynamic analysis of bladed rotor-bearing systems. 8th International Conference on Vibration Engineering, Shanghai, 2021.

[17] Shuai Wang, Yanyang Zi, Yanying Fu, et al. Performance analysis and optimization of a silicon-based flexible sensor, Proceedings of the 10th International Conference on Frontiers of Design and Manufacturing, Chongqing, 2012.

三、部分发明专利：

[1]訾艳阳,王帅,李兵,陈景龙,曹宏瑞,成玮,张春林,万志国.一种离心压缩机裂纹叶轮结构的振动建模与分析方法，专利号：ZL 201410195851.6.

[2]訾艳阳,王帅,李兵,陈景龙,曹宏瑞,成玮,张春林,万志国.一种运行状态下离心压缩机叶轮裂纹的频域定量诊断方法,专利号: ZL：201410195623.9.

[3]王帅,毕传兴,郑昌军,张小正,张永斌,徐亮.一种裂纹转子刚度系数测量方法,专利号: ZL 201711295545.X.

[4]王帅,梁梦辉,毕传兴,郑昌军,张永斌.一种叶轮-轴承-转子系统的高效定量建模方法,专利号: 202010096476.5.

[5]王帅,毕传兴,郑昌军,梁梦辉.一种循环对称结构中裂纹损伤的定量识别方法,专利号: 202010960794.1.

[6]王帅,杨庚,纪犁,毕传兴,郑昌军.一种叶盘减振的阵列式调谐质量阻尼器,专利号: 202111142860.5.

[7]王帅,纪犁,杨庚,毕传兴,郑昌军.一种用于叶盘减振的调谐质量阻尼器阵列的动态设计方法,专利号: 202111142858.8.

[8]王帅,李佳航,汪方潮,毕传兴,郑昌军.一种叶轮结构裂纹损伤的识别与定位方法,专利号: 202111326911.X.

[9]王帅,杨庚,孙磊,汪方潮,毕传兴,郑昌军.一种转子减振的动力吸振器,发明专利, 2022.

[10]王帅,孙磊,杨庚,毕传兴,郑昌军.一种叶盘多模态减振的环形吸振器,发明专利, 2022.

[11]王帅,汪方潮,毕佳宾,刘祥程,陈陈,朱新元.一种用于整体叶盘的动力吸振器减振性能实验装置,发明专利, 2022.